do logishit mice still double click? I swore them off in 2018

do logishit mice still double click? I swore them off in 2018

Homeless People Are Sexy Shirt $21.68

CRIME Shirt $21.68

Homeless People Are Sexy Shirt $21.68

  1. 2 weeks ago
    Anonymous

    i get the double click meme on my 502 occasionally but usually just huffing and puffing below LMB fixes it for the next half a year or so

  2. 2 weeks ago
    Anonymous

    never had any issues with my g402

  3. 2 weeks ago
    Anonymous

    G502X here

    it just werks

    • 2 weeks ago
      Anonymous

      same i think the new optical switches make it impossible to double click

  4. 2 weeks ago
    Anonymous

    My G413 keyboard does that, so fricking annoying

  5. 2 weeks ago
    Anonymous

    Double clicking and mouse wheel issues happen with pretty much any brand. The only way you can truly make sure that it doesn't happen is to get a mouse with optical switches.

    Either that or you buy a PCB hotswap + new switches to replace them when they eventually start double clicking or the mouse wheel fricks up.

    • 2 weeks ago
      Anonymous

      I have a Razer Viper 8k with optical mouse switches the only problem is the mouse wheel isn't optical and it turned bad(erratic scrolling up/down) only after a month.

  6. 2 weeks ago
    Anonymous

    >razer
    >doesnt double click but the click gets soft after a while
    >side grips wear and gives a slippery greasy feel

    >logitech
    >snappy feeling clicks but high chance of double click

    maybe I should just stop buying mainstream shit or something

    • 2 weeks ago
      Anonymous

      double click but the click gets soft after a while

      no it's
      >LMB and RMB are optical switches but literally everything else on the mouse is a cheap switch that double clicks in a week anyway so who cares

    • 2 weeks ago
      Anonymous

      put babypowder to stop the greasy feeling. sounds crazy but trust me, its a trick for onaholes

      • 2 weeks ago
        Anonymous

        fleshlights recommend 100% corn starch apparently. my logitech mouse has that slightly textured plastic that when it eventually starts stripping will be nasty.

  7. 2 weeks ago
    Anonymous

    Works on my machine.

  8. 2 weeks ago
    Anonymous

    yeah, their gaming mice are dogshit

    their office mice are pretty durable though

  9. 2 weeks ago
    Anonymous

    Had 6 G502 heros that all exhibited click issues.

    Now I have a G502x and knock on wood, no click issues.

    I think they fixed it by going with a different switch manufacturer source.

  10. 2 weeks ago
    Anonymous

    I've had a couple of logitech mice, every single one double clicked and had broken wheel a while.
    Logitech is fricking trash

  11. 2 weeks ago
    Anonymous

    >cursed with big hands
    >every mouse on the market is just too damn small to get a decent grip

    • 2 weeks ago
      Anonymous

      same

      I am begging you to learn to replace switches

      Thats what i did, already replaced m1 twice

    • 2 weeks ago
      Anonymous

      Try Roccat. They're made for bearpaws.

  12. 2 weeks ago
    Anonymous

    I am begging you to learn to replace switches

    • 2 weeks ago
      Anonymous

      Forgot pic. Rated for 80M clicks

      • 2 weeks ago
        Anonymous

        i just fixed my mouse by layering some tape on the bottom of the button, so the non-sticky side pushes against this button
        also cleaned that little button off beforehand. seems to be working so far. its annoying when you cant even highlight text while holding a click

      • 2 weeks ago
        Anonymous

        i ruined my DeathAdder thanks to shitty soldering by me.

        i replace it once and double click again, D2FC-F-K(50M)-RZ avoid this model it has china word on it.

        this one better than omron

        • 2 weeks ago
          Anonymous

          >this one better than omron
          For me, yes. It's louder and pushes back against you harder if that's an issue (it's not for me)

      • 2 weeks ago
        Anonymous

        Onle strand of hair or dirt makes any switch act up.
        Most tards never open their mouse to clean the dirt. Let alone to resolder new switch. I always move around secondary button switches before throwing away the mouse.
        So I get more than twice the longevity.
        No fix for the middle wheel...

    • 2 weeks ago
      Anonymous

      I did but it was a fricking nightmare because I had no idea what I was doing
      To anyone going to do it, get a chisel tip for your iron, and a solder sucker

      • 2 weeks ago
        Anonymous

        Solder sucker is MVP. I am officially a solder sucker otaku now.

        • 2 weeks ago
          Anonymous

          "But anon, it's still in its package."
          Yes, that's the one I keep safe. It's my display solder sucker.

          I only have two products from ENGINEER brand but they're the pride of my workshop. The other is a terminal crimping tool with a built-in screw cutter. Cuts up to M3 screws. If the project needs bigger than an M3, that's not a project I'm interested in. ENGINEER doesn't think it should be necessary and so neither do I. Glorious Nip Steel.

  13. 2 weeks ago
    Anonymous

    I've had a G502 Lightspeed for 4 years and besides regular wear it still works perfectly fine, no double clicking or mouse wheel issues.

  14. 2 weeks ago
    Anonymous

    i actually fricked up replacing a switch and ripped the switch out without desoldering it. obviously now i know thats the wrong thing to do, now anything i do wont make the mouse detect a new switch. what exactly happened and is it possible to fix

    • 2 weeks ago
      Anonymous

      >what exactly happened and is it possible to fix
      Probably ruined PCB lines, i don't you can fix it easily at home, but you could probably order PCB replacement on AliExpress or smth

      • 2 weeks ago
        Anonymous

        ive been reapplying conductive paint to see if i can fix it

        Post PCB. I wanna see how hard you gaped the board.

        i honestly have no idea, obviously it stopped working, im pretty sure whatever damage i did was not too obvious or visible.

        • 2 weeks ago
          Anonymous

          You would need a soldering station, just buy a new mouse

          • 2 weeks ago
            Anonymous

            i did buy a new mouse. i used to replace several switches on that mouse but that one time i just had a complete lapse in judgment and didnt desolder.

            what exactly is a soldering station?

            • 2 weeks ago
              Anonymous

              >>what exactly is a soldering station?
              NTA but probably what this guy has

              • 2 weeks ago
                Anonymous

                i have most of what he has except the wire because i am trying to use conductive paint to repair the pad, but im not really sure where else it broke so i could be repairing frick all, but these videos are very helpful anyway

              • 2 weeks ago
                Anonymous

                >conductive paint
                I'm not every knowledgeable but maybe paint is not enough? From what i understand the only thing stopping you from fixing the mouse is your own lack of experience, so frick around with and maybe you will fix it and gain exp, its not like you can do anything else with it. good luck anon

              • 2 weeks ago
                Anonymous

                the traces are very very small. it does seem exceptionally difficult to do anything to fix it if it's actually the trace thats broken.

                replacing your mouse switches are easy, just watch some videos about it and dont be completely moronic like me one time and not desolder.

              • 2 weeks ago
                Anonymous

                so yeah anyone wanna say what theyre seeing that i might not about what is wrong with this pcb? do i need to scrape off that stuff at the left part? the silver stuff is me reapplying conductive paint on the pads so the solder has something to stick to, but any clicking isnt being detected after soldering it.

              • 2 weeks ago
                Anonymous

                I'm no expert at this by any means, but is that shit you put on there potentially acting as an insulator instead since it's on the protective coating on the pcb, not on the copper itself? I was under something of an understanding that when resoldering pbs and shit you basically had to strip off that green protective layer to some degree if the contacts aren't clearly exposed.

              • 2 weeks ago
                Anonymous

                Thats correct. The green paint is to insulate. You normally do this when repairing traces and solder on a jump wire. Watch any gameboy cartridge repair video and you'll see this process.

              • 2 weeks ago
                Anonymous

                and no, thats conductive paint, because i stripped the copper away when i didnt desolder the switch. now i am trying to reapply something conductive for a new solder to stick to, but i am missing something where the new solder with the switch isnt working, and its just difficult to tell unless i know how the circuit works or something or if i could test the traces better.

              • 2 weeks ago
                Anonymous

                Are you willing to buy a $100 soldering station to fix only one $80 mouse? Just buy a new one dummy

              • 2 weeks ago
                Anonymous

                like i said i have most of the essential stuff already and i did buy a new mouse too

                I'm no expert at this by any means, but is that shit you put on there potentially acting as an insulator instead since it's on the protective coating on the pcb, not on the copper itself? I was under something of an understanding that when resoldering pbs and shit you basically had to strip off that green protective layer to some degree if the contacts aren't clearly exposed.

                yea so cut some of the green stuff away along the lines. honestly the traces are so small, i might just use a needle or something

              • 2 weeks ago
                Anonymous

                you shouldn't cut the green stuff away, you strip it with some kind of solvent (acetone? I don't remember).

                and no, thats conductive paint, because i stripped the copper away when i didnt desolder the switch. now i am trying to reapply something conductive for a new solder to stick to, but i am missing something where the new solder with the switch isnt working, and its just difficult to tell unless i know how the circuit works or something or if i could test the traces better.

                use a multimeter.

        • 2 weeks ago
          Anonymous

          Just buy new mouse or PCB, you are unlikely to fix it by yourself.

          ?si=5gGszQ1YRlzOAzRP

    • 2 weeks ago
      Anonymous

      Post PCB. I wanna see how hard you gaped the board.

  15. 2 weeks ago
    Anonymous

    Yes dont buy one. Get an endgame gear mouse instead

  16. 2 weeks ago
    Anonymous

    I have never had a logitech mouse double click on me

  17. 2 weeks ago
    Anonymous

    I've been using a 502 for like 8 years and that has literally never happened once you moronic homosexual

  18. 2 weeks ago
    Anonymous

    their fricking keyboards do, but my 502 hero or whatever is good a couple years in

  19. 2 weeks ago
    Anonymous

    Do mice have an enthusiast/diy scene like mechanical keyboards?

    • 2 weeks ago
      Anonymous

      not afaik, as far as mice go you just look for a good balance of shit for (You)
      number of buttons, sensor, shape, size, etc, an mmogay might prefer one of those billion button mice over one with a god tier sensor and such
      it's not really like keebs where you can just build your own if you're determined and autistic enough
      building your own DIY mouse requires much more effort

  20. 2 weeks ago
    Anonymous

    I got this exact mouse and it was double clicking after a couple of months. I took it apart to see if I could clean up the switches and the tiny, almost transparent piece of metal they use for them now is so funny. I got out my old G400S to compare and it has these huge, sturdy metal plates that still work almost a decade later.
    Quality has gone to shit, prices have gone up. That's capitalism baby.

  21. 2 weeks ago
    Anonymous

    it's a lottery pretty much
    they will double click fast if you get one with chinese switches

  22. 2 weeks ago
    Anonymous

    my logitech g102 started to double click, but i cleaned it and it keeps going alrigh
    scroll is a bit fricked, but it still works, so im gonna keep using it for now, i have the sime mice for like 6 years now and im thinking of a wireless one, what would you guys recommend in reasonable price?

    • 2 weeks ago
      Anonymous

      Endgame gear wireless is really good

  23. 2 weeks ago
    Anonymous

    I heard it's something in the voltages or some shit, they run it below spec which causes the switches to wear out much faster.

  24. 2 weeks ago
    Anonymous

    Still? Unfortunately yes.
    Logi mouse used to be good, but once they discovered they can skimp out, while keeping the same pricetag, they went full israelite mode, and now their midrange or even high-end mouse are notorious for doubleclicking.
    Just get Razer or Steelseries or something, Those two used to be bad, but they're pretty decent now.
    Nu-Logi is the other way around.

    • 2 weeks ago
      Anonymous

      I use the Rival 600 from steelseries and sent it in for warranty cause the side pads came off with time due to heat and sweat from hand (known issue). That was after nearly 2 years. Mouse worked still perfectly and I just for a brand new one. The shape and comfort are unrivalled. Still can't find any other mouse as good or better so I will keep using it indefinitely.

  25. 2 weeks ago
    Anonymous

    I've been using mine since 2012 without problems

  26. 2 weeks ago
    Anonymous

    You fell for the gaming mice meme. You get what you fricking deserve.

    t. G203 user

    • 2 weeks ago
      Anonymous

      >You fell for the gaming mice meme
      >you should've bought a G203
      >a gaming mouse
      >with the same issues as the rest of logitech's mice
      ????

      • 2 weeks ago
        Anonymous

        I know they call it a gaming mouse but it really isn't. It's a regular mouse with two buttons on the side. It's only "gaming" because it has RGB.

  27. 2 weeks ago
    Anonymous

    Where are my g600 chads at

    • 2 weeks ago
      Anonymous

      What kind of autist needs that many buttons?

      • 2 weeks ago
        Anonymous

        i use it when im too lazy to use both hand but still need mouse. for example i used g602 recently for Last Epoch

      • 2 weeks ago
        Anonymous

        I won't argue the autist bit, however there's plenty of games that can leverage an array of buttons like that. I just want to know how the frick they push them without jamming fricking 4 buttons at once. My thumb is huge. I could not use this.

      • 2 weeks ago
        Anonymous

        it's supposed to be for MMOs but it's useful for any game with a hotbar or a lot of binds.

        I won't argue the autist bit, however there's plenty of games that can leverage an array of buttons like that. I just want to know how the frick they push them without jamming fricking 4 buttons at once. My thumb is huge. I could not use this.

        >My thumb is huge. I could not use this.
        I have big hands and i can use it just fine, you must be a fricking ogre

    • 2 weeks ago
      Anonymous

      have a nice day mmogay

    • 2 weeks ago
      Anonymous

      Three click mouses are underrated

    • 2 weeks ago
      Anonymous

      here
      got a second hand one for cheap and swapped the double clicking switch
      i like it a lot

  28. 2 weeks ago
    Anonymous

    i have had two of these and have never had this issue. the first one broke because i dropped it in a river (long story) but i still have my second one now for like 5 years now and it still works perfectly. i think your issue is that you are an ugly fat unhygienic loser that gamer gunks all over his mouse with his disgusting fat oily hands.

  29. 2 weeks ago
    Anonymous

    I've gone through two Logitech G203's and both times my scroll wheel broke. I don't think I'm a particularly abusive scroller, so it sucks because I like the mouse.

  30. 2 weeks ago
    Anonymous

    yes, i think it's due to mechanical switches, get a mouse that uses optical.

  31. 2 weeks ago
    Anonymous

    I have like piss hands or something. like every mouse I touch within a few months wears through the rubber.

    • 2 weeks ago
      Anonymous

      Wash your hands more often and clean your mouse. Skin oil eroding rubber coating is nothing new, but if it's happening in a few months it means you're a dirty frick.

  32. 2 weeks ago
    Anonymous

    Yes.
    I started buying 10$ shitty Chinese wireless mice and never looked back.

  33. 2 weeks ago
    Anonymous

    my logitech pro double clicks after 3 years.

  34. 2 weeks ago
    Anonymous

    They definitely do. Some people might get lucky every now and then but generally you can expect double clicking in about 2 years.

  35. 2 weeks ago
    Anonymous

    My M100 is fine, stop being a consoomer

Your email address will not be published. Required fields are marked *